Print on a partly used label sheet
Tell PixoLabel which labels are already missing from your first sheet. Your designs fill the remaining available positions.
Mark positions that should stay blank
- Set up the correct sheet and add your designs and quantities.
- Open Print → Use a partly used sheet, or choose Mark positions not to print above the preview.
- Select each unavailable position. You can use the keyboard as well as a pointer.
- Review the first sheet. Reset the marks when you start with a fresh sheet.
How the remaining labels are allocated
The used positions apply to the first sheet only. Any remaining quantity continues on fresh sheets. For example, if a 15-position sheet has three used positions, it has 12 available positions. A job of 15 labels uses those 12 positions and three positions on the next sheet.
If every position is marked used, select a fresh sheet or clear at least one mark before exporting. Changing the sheet geometry clears the used-position marks so they do not carry over to a different layout.
Check whether your stock can be fed again
Follow your printer and label supplier’s instructions before feeding a partly used sheet. Only reuse stock that remains suitable for your printer. Check the orientation, test on plain paper and use Actual size / 100% printing.
Save a .pixolabel project to retain the job’s sheet settings and used-position marks.